Epson SC-T5160

C
Either touch - or + to show the intended
adjustment values or touch the adjustment
entry area to enter the adjustment values using
the keypad screen.
Shifting the adjustment value by 1 will correct
the misalignment by about 0.1 mm in the
actual size.
When the Scan Results Are Shifted Up in
Relation to the Feed Direction of the Original
Set the adjustment value toward the plus sign.
When the Scan Results Are Shifted Down in
Relation to the Feed Direction of the Original
Set the adjustment value toward the minus sign.
D
Touch OK.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Problem Solver
204