Epson SC-T5400 SERIES User Manual

Settings item Settings value Explanation
Confirm Recipient On
Set to On to be able to check the recipients before scanning the
original.
Off
*
Email Server
Server Settings Off Select this when not setting an email server.
POP before SMTP Authenticates on the POP3 server (receiving mail server) before
sending the email. When you select this item, set the POP3 server.
SMTP-AUTH Authenticates on the SMTP server (outgoing mail server) when
sending the email. The mail server needs to support SMTP
authentication.
Connection Check Able to check the connection with the email server.
Scan Options
Confirm Before Eject‐
ing Scanned Docu‐
ment
On
*
Set to On to keep the original at the paper eject slot after it is scanned
and display the removal confirmation screen. If you want to eject the
original right after scanning it, set this to Off.
Off
Correct Skewed Im‐
age
On
*
Automatically corrects a scanned image that is skewed, and then
saves it. The range of correction is from the origin to a width of 914.4
mm.
Enable this only if the Original Size or Scan Size has been set to Auto
Detect.
Off
Document Feed Ad‐
justment
-1.00 to 1.00 (0
*
)
If the length of the original and the print results of the copied or
scanned files do not match, adjust the document feeding. If you want
to shorten the length of the print out, press the minus button. If you
want to lengthen it, press the plus button. Differences in length may
occur due to the type of paper used for printing.
U “Paper Feed Adjust (Auto)” on page 49
Image Stitching Ad‐
justment
-5 to 5 (0
*
)
Correct the position for image stitching if the scanned results are
misaligned.
U “Image Stitching Adjustment” on page 216
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
160

Epson SC-T5400 SERIES Specifications

General

Brand	Epson
Model	SC-T5400 SERIES
Category	Printer
Language	English