Epson SC-T5400 SERIES User Manual

Settings item Settings value Explanation
PDF Settings
Document Open Password
Setting the file format to PDF allows you to set the security for the
PDF.
Set Document Open Password when you create a PDF that requires a
password to be opened. To create a PDF file for which a password is
needed to print or edit, set the Permissions Password.
Password
Setting
Off
*
On
Password Enter password
Permissions Password
Password
Setting
Off
*
On
Password Enter password
Printing
Allowed
*
Not Allowed
Editing
Allowed
*
Not Allowed
Resolution 200dpi Select the resolution for scanning.
300dpi
*
400dpi
600dpi
Scan Size
Auto Detect -
The default setting of Auto Detect is recommended in most
situations. Note that, depending on the original, it may not be
possible to detect the width correctly even when the setting is Auto
Detect. Similarly, tracing paper and the optional carrier sheet are not
detected automatically. In such cases, change from the standard size
and specify a width of your choosing. If the desired size is not in the
options, then select User-Defined, and enter the length and width of
the original.
ISO A Display supported scan
sizes
US-ANSI
US-ARCH
JIS B
ISO B
User-Defined Display the Scan Size Input
screen
Top Offset
0.0 to 100.0mm (0.0
*
)
0.00 to 3.94inch (0.00
*
)
If you do not want to scan the top margin of the original, you can
adjust the top, and then scan. Enter the value for the length from the
top of where you want to start scanning.
If the carrier sheet is loaded, set the value to 19 mm.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
180

Epson SC-T5400 SERIES Specifications

General

Brand	Epson
Model	SC-T5400 SERIES
Category	Printer
Language	English