Epson SOLAR Series Instruction

Instruction of Watch Movement
Crown position
N : normal 1 : 1st click 2 : 2nd click
Crown Free
Turn counterclockwise for
date change
Time setting
Button A
Stopwatch Start
Stop
Restart
Stopwatch Start
Stop
Restart
Stopwatch hand
position adjustment
(clockwise)
Button B
Stopwatch Reset
Split
Split release
Stopwatch Reset
Split
Split release
Stopwatch hand
position adjustment
(counterclockwise)
Battery indicator
(Press more than 1 second)
Battery indicator
(Press more than 1 second)
 Display
 Crown and button operation
Cal. VR42B
SOLAR SERIES
- 1/1 sec. chronograph
N → 1 → 2
Button A
Button B
Crown
Second hand
24 hour hand
Date
Stopwatch minute hand
Minute hand
Hour hand
Stopwatch second hand
 How to set time
(1) Pull the crown out to the 2nd click position when the second hand is at the 12 o'clock position.
(2) Turn the crown to set the hour and minute hands.
Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.
(3) Push the crown back to the normal position.
- The 24 hour hand moves correspondingly with the hour hand.
- When setting the hour hand, check that the 24 hour hand is correctly set.
- When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact time.
- When the stopwatch is measuring, if the crown is pulled out to the 2nd click position, it will automatically reset the
stopwatch hands to "0" position.

Epson SOLAR Series Specifications

General

Brand	Epson
Category	Watch
Movement	Quartz
Series	SOLAR
Power Source	Solar