Need help?Do you have a question about the Epson SOLAR Series and is the answer not in the manual?
General| Brand | Epson |
|---|---|
| Category | Watch |
| Movement | Quartz |
| Series | SOLAR |
| Power Source | Solar |
Presents key specifications like movement size, casing diameter, height, and running time.
Details solar power conversion, battery replacement elimination, and running time.
Covers dial light transmittance, power depletion warning, and over charge prevention.
Details movement dimensions, quartz oscillator, accuracy, and operating temperature.
Explains functions, features like anti-magnetism, and driving current consumption.
Provides secondary battery specs and lists separated parts with codes.
Diagram illustrating the arrangement of key components like the setting stem and battery.
Detailed drawings and dimensions related to the watch casing and internal layout.
Details unbalance, moment of inertia for hands, and their respective part numbers.
Specifications for the hand setting stem, including part number and dimensions.
Provides dial dimensions, hole placements, and transparency requirements.
Illustrates the solar cell unit, terminals, and cross-sectional views.
Guidance on avoiding damage to the solar cell surface and ensuring dial transparency.
Steps for installing the secondary battery unit, including system reset.
Instructions for setting stem removal and attention to casing structure.
Guidance on setting hands, removal, and cautions regarding charging temperatures.
Explains how the dial is secured by guide poles on the solar cell unit.
Details crown positions (0, 1st, 2nd click) and button functions for chronograph.
Procedure for setting chronograph hands to zero and performing a system reset.
Illustrates standard, accumulated elapsed, and split time measurement modes.
Overview of chronograph measurement capabilities and increments.
Visual guide for chronograph start, stop, split, and reset operations.
Notes on chronograph stop after 60 minutes and function invalidity.
Summary of movement size, diameter, height, and running time.
Diagram for disassembling the dial, solar cell unit, and related parts.
Steps for disassembling date corrector and intermediate wheel components.
Illustrates disassembly of the secondary battery, clamp, and circuit block.
Details disassembly of levers, wheels, pinions, and coil blocks.
Comprehensive list of all parts with their corresponding part numbers.
Instructions for charging the watch and important cautions regarding temperature.
Table providing estimated charging times based on illumination conditions.
Definitions of charging conditions A, B, and C for different operational states.
Step-by-step guide for setting the date using the crown.
Step-by-step guide for setting the hour and minute hands using the crown.
Instructions for standard, accumulated, and split time stopwatch measurements.
Important notes on stopwatch operation, including limits and hand reset.
Steps to adjust the stopwatch minute hand to the zero position.
Steps to adjust the stopwatch 1/5-second hand to the zero position.
To Next Page
