Instruction of Watch Movement
Display
Crown operation
Crown position
N : normal 1 : 1st click 2 : 2nd click
Crown Free
Turn clockwise
for date change
Time setting
How to set time
(1) Pull the crown out to the 2nd click position when the second hand is at the 12 o'clock position.
(2) Turn the crown to set the hour and minute hands.
Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.
(3) Push the crown back to the normal position.
- When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact time.
How to set date
(1) Pull the crown out to the 1st click position.
(2) Turn the crown to set the date.
(3) Push the crown back to the normal position.
Tips: When the date change during daytime, it happens when a.m./p.m. is wrongly set. Advance the hour hand by 12 hours.
- Do not set the date between 9:00 p.m. and 1:00 a.m..
N → 1 → 2
Crown
Minute handHour hand
Second hand
Date
Cal. VS37A
SOLAR SERIES
- 3 hands / Date
To Next Page
Need help?
General
