214
5. Select Head Cleaning.
6. Select Start to clean the print head. You see a message on the LCD screen during the cleaning
cycle.
Caution: Never turn off the product or open the printer cover during a cleaning cycle or you may not
be able to print.
When the cleaning cycle is finished, you see a message on the LCD screen.
7. Select Check.
8. Select Print to run a nozzle check and confirm that the print head is clean.
If you don’t see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then try cleaning the print head again. If quality still does not improve, run a Power
Cleaning. If there is still no improvement, contact Epson support.
Parent topic: Print Head Cleaning
Related references
Where to Get Help
Related tasks
Refilling the Ink Tanks
Checking the Nozzles Using the Product Control Panel
Loading Paper in the Cassette
To Next Page
Loading...
