Maintaining Your Printer
33
7. Press down firmly on the ink cartridge
clamp until it snaps in place.
8. If you need to replace the other ink
cartridge, repeat steps 3 through 7 before
continuing with step 9.
9. Press the
e ink replacement button and
close the printer cover. The printer begins
charging the ink delivery system.
The green
P power light flashes and the
printer makes noise. Charging takes about
half a minute. When it’s finished, the green
P power light stops flashing and stays on,
and the red
b
error light goes out.
Caution: Never turn off the printer while the
green
P
power light is flashing, unless the
printer hasn’t moved or made noise for more
than 5 minutes.
To Next Page
Loading...
Need help?
General