8
Connecting to a Macintosh
1. Turn off the printer and your Macintosh.
2. Connect one end of the cable to the serial connector on
the back of the printer.
3. Connect the other end of the cable to either the printer
port or the modem port on your Macintosh.
Install the Printer Software
Now you need to install the printer software for Windows
®
95,
Windows 3.1, or Macintosh from the EPSON printer software
CD-ROM.
If you don’t have a CD-ROM drive, you can:
◗ Create install diskettes from the CD-ROM using another
computer. For Windows, run the MAKE_FD.EXE program in
the Drivers directory on the CD-ROM and follow the
instructions on the screen. For Macintosh, follow the
instructions on page 12.
◗ Download your printer software or order it on diskettes
from EPSON. See the ordering sheet in your printer box.
In addition to the printer software, the CD-ROM contains the
Look Your Best Color Pak Electronic Suite, an online bundle
full of creative software for making T-shirts, banners, magnets
and other great creations. You’ll also get fonts, photos, and
iron-on art as well as EPSON Extra Value coupons and the
scoop on EPSON product and supplies.
Note:
If you’re using a
PowerBook
™
with a
combination printer/modem
port, connect the printer to
that port.
Fiji Quick setup Rev.1 5/22/97, 10:16 AM8
To Next Page
Loading...
Need help?
General