4
1. Lower the output tray and raise the printer cover.
2. Press the power button to turn on the printer. The power
light flashes, the and ink out lights come on, and the ink
cartridge holders move to the installation position.
3. Pull up the ink cartridge clamps.
4. Open the ink cartridge packages. Completely remove the
disposable yellow portion of the tape seal on top. Don’t remove
the white portion.
Install the Ink Cartridges
Caution:
You must remove the
yellow portion of the
tape seal from the top
of the cartridge or you
will permanently
damage it. Don’t
remove the tape seal
from the bottom or ink
will leak.
color ink
cartridge
○○○
Warning:
If ink gets on your
hands, wash them
thoroughly with soap
and water. If ink gets in
your eyes, flush them
immediately with water.
black ink
cartridge
○○○○○
Fiji Quick setup Rev.1 5/22/97, 10:15 AM4
To Next Page
Loading...
Need help?
General