Place the printer flat on a stable desk near a grounded outlet.
Leave plenty of room in back for the cables and enough room
in front for opening the output tray.
Do NOT put the printer:
◗ In an area with high temperature or humidity
◗ In direct sunlight or dusty conditions
◗ Near sources of heat or electromagnetic interference, such
as loudspeakers or cordless telephone base units.
Also, be sure to follow the Safety Instructions in the
Introduction of your User’s Guide.
2
Insert the paper support in the top slot on the back of the
printer.
Attach the Paper Support
Fiji Quick setup Rev.1 5/22/97, 10:15 AM2
To Next Page
Loading...
