Summary of Panel Settings 43
English
Maintenance Nozzle Check Print a nozzle check pattern to check the
condition of the print head.
Head Cleaning Clean the print head to improve the
condition of the print head.
LCD Brightness -10 to +10
Head Alignment Adjust the alignment of the print head.
Change Ink Cartridge Change ink cartridges before they are
expended.
Language
Country/Region
Display Format 1-up with Info, 1-up without Info, View
Thumbnail Images
Beep On, Off
PictBridge Setup Set the print settings when printing with a PictBridge device.
Restore Default Settings Reset the LCD panel settings to the factory default settings.
To Next Page
Loading...
