EPSON Stylus PHOTO 2100/2200 Revision B
TROUBLESHOOTING Error Indications and Fault Occurrence Causes 76
Cutter Jam Error - Blink 2 - This error is detected if the paper could not be cut
properly due to overload after Cutter operation but the
Cutter could return to the home position.
Cutter Position Error Off Blink 2 Blink 2 This error is detected if the paper cannot be cut properly
due to overload during Cutter operation and the Cutter
cannot return to the home position.
"-" : don't care High speed Blink : 0.1sec on + 0.1sec off repetition
Blink : 0.5sec on + 0.5sec off repetition Blink alternately 1 : 0.5sec on + 0.5sec off repetition
Blink 2 : 0.2sec on + 0.2sec on + 0.2sec on 0.4sec off repetition Blink alternately 2 : 0.5sec on + 0.5sec on repetition
Table 3-1. Error Indications and Fault Occurrence Causes
Printer Condition
Indicators
EPSON Printer Window 3 Fault Occurrence Cause
Power Paper Ink 1-7
To Next Page
Loading...
