Epson Stylus Photo 2100 - Page 95

EPSON Stylus PHOTO 2100/2200 Revision B
TROUBLESHOOTING Troubleshooting 95
Table 3-16. Phenomenon-Based Maintenance Request Check Points
Occurrence Timing Phenomenon Detail
Faulty Part/Part
Name
Check Point Remedy
At power-on At power-on, the printer does not
operate at all.
Waste ink pads 1. Using the adjustment program, check that the Protection counter
A value is 60352 points or more.
1. Change the Waste ink pads and perform panel
operation to reset the Protection counter A
value (20<H>, 21<H>). Refer to 1.3.6 "Special
Setting Mode Function".