14
3. Open a Windows application program and select a document to print.
4. Open the File menu and click
Print
. You see a Print dialog box, such as this:
5. Make sure EPSON Stylus Photo 750 is selected.
6. If your application’s Print dialog box contains a Properties button, click
Properties and go to step 7.
If you see a Setup, Printer, or Options button, click it. Then click the Properties
button on the next screen.
7. Now you see the printer settings dialog box. If necessary, click the Main tab to
display the settings shown below.
If you see a Properties
button, click it
If you see Setup, Printer,
or Options, click that
button instead; then click
Properties on the next
screen
Make sure your printer
is selected here
Quality/Speed slider
Main tab
Media Type setting
Automatic
mode setting
Ink setting
basics.book Page 14 Monday, February 22, 1999 9:31 AM
To Next Page
Loading...
