Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W 
Disassembly Procedures 
https://www.manualsbooks.com 
 
4.2.2.12 Cassette 
Unit  (p114) 
4.2.2.10 Rear Right 
FAX Housing  (p112) 
4.2.4.21 Lower Paper 
Guide Waste Ink Pad 
Assy  (p165) 
4.2.3.3 Power Supply 
Unit  (p121) 
4.2.2.11 Right Housing / 
Card Cover  (p113) 
4.2.4.22 Front Paper 
Guide Waste Ink Pad 
(p166) 
4.2.2.9 Rear ASF Paper 
Guide Cover  (p111) 
4.2.3.2 Main Board / 
Grounding Plate M/B 
(p117) 
4.2.3.4 Wireless LAN 
Board  (p122) 
4.2.4.7 Lower ASF Paper 
Guide Assy  (p138) 
4.2.4.3 Decompression  4.2.3.4 Wireless LAN 
Pump Unit  (p130)    Board  (p122) 
4.2.4.9 LD Roller  (p142)  4.2.4.8 CDR Tray Assy   
(p140) 
4.2.4.20 Waste Ink Tray 
Assy  (p163) 
4.2.3.5 Card Slot Assy   
(p123) 
The colored blocks indicate the following. 
Red:  Basically the disassembling procedures are in common with both 
Artisan 800/PX800FW/TX800FW and Artisan 700/PX700W/ 
TX700W, but some parts differ in shape. 
Blue:  Artisan 800/PX800FW/TX800FW only. 
Yellow: Artisan 700/PX700W/TX700W only. 
The parts surrounded with dotted line are not the shortest ways of 
removing them, but you need to remove the parts/units if they exist on the 
way to the target part/unit. 
When replacing the printer mechanism, see 
4.2.1 "Parts transferred from 
the old printer when replacing the Printer Mechanism" (p101) 
to transfer 
the parts from the old printer to the new one. 
 
4.2
 
Disassembly Procedures 
For disassembling each unit, refer to the pages in the following flowchart. 
 
“ 
4.2.2.13 Paper Guide 
Top Assy 
” 
(p115) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
               
 
 
 
 
 
Flowchart 4-2 Disassembling Flowchart (2) (p100) 
 
Flowchart 4-1. Disassembling Flowchart (1) 
4.2.4.10 Pick-up 
Roller  (p143) 
(p115)(Artisan 800/ 
PX800FW/TX800FW) 
(p103) 
4.2.2.4 Upper Left 
Housing / Panel Lock 
4.2.2.13 Paper Guide 
Top Assy  (p115) 
4.2.2.1 ADF Unit (Artisan 
800/PX800FW/TX800FW 
only)  (p102) 
See Flowchart 4-2 Disassembling Flowchart (2) (p100) for 
disassembling procedures of the Scanner Unit and the ADF Unit.