Epson Stylus Photo R1900 - Page 108

EPSON Stylus Photo R1900/R2880/R2000 Revision E
Disassembly And Assembly Disassembling the Printer Mechanism 108
Confidential
 Align the guide pin and four Tabs on the ASF Assy with the
positioning holes on the Main Frame so that there is no gap
between the ASF Assy and the Main Frame.
Figure 4-97. Reinstalling the ASF Assy
 Tighten the screws in the order shown in Figure 4-96.
Tab
Tab
Guide pins
Tab
Tab
A D J U S T M E N T
R E Q U I R E D
After replacing or removing the ASF Assy, always make the required
adjustments referring to the following.
 “Chapter 5 Adjustment (p.137)”