EasyManua.ls Logo

Epson Stylus Photo R1900 - Motors & Sensors

Epson Stylus Photo R1900
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EPSON Stylus Photo R1900/R2880/R2000 Revision E
Operating Principles Motors & Sensors 32
Confidential
2.5 Motors & Sensors
Motors
Sensors
Figure 2-4. Motors and Sensors Layout
Table 2-5. List of Motors
Fig. Name Specific
A PF Motor
Type: DC Motor Drive voltage: 42VDC±5%
Armature resistance: 21.2 ±10%
B APG Motor
Type: DC Motor Drive voltage: 42VDC±5%
Armature resistance: 64.7 ±15%
C ASF Motor
Type: 4-phase 48-pole PM type stepping motor Drive voltage: 42VDC±5%
Winding resistance: 7.0 ±10% (per phase at 25°C)
DCR Motor
Type: DC Motor Drive voltage: 42VDC±5%
Armature resistance: 23.6 ±10%
EPump Motor
Type: 4-phase 48-pole PM type stepping motor Drive voltage: 42VDC±5%
Winding resistance: 10.3 ±10% (per phase at 25°C)
Table 2-6. List of Sensors
Fig. Name Specific
1 PF Encoder sensor Type: Rotary Encoder Drive voltage: 3.3VDC±5%
2 APG Sensor (1)
Type: Transmissive photo interrupter Drive voltage: 3.3VDC±5%
Sensor output:
High: In the domain of each PG position
Low: Between PG positions
3 APG Sensor (2)
Type: Transmissive photo interrupter Drive voltage: 3.3VDC
±5%
Sensor output:
High: In the domain of large PG
Low: In the domain of small PG
4 ASF Sensor
Type: Transmissive photo interrupter Drive voltage: 3.3VDC
±5%
Sensor output:
High: Home position
Low: Other than home position
5PE Sensor
Type: Transmissive photo interrupter Drive voltage: 3.3VDC
±5%
Sensor output:
High (2.4V or more): No paper
Low (0.4V or less): Paper exists
6 CR Encoder sensor Type: Linear Encoder Drive voltage: 3.3VDC
±5%
7 PW Sensor
Type: Reflective photo interrupter Drive voltage: 3.3VDC±5%
Sensor output:
High: No paper
Low: Paper exists
8 Ink Mark Sensor Type: Diffuse reflective photo interrupter Drive voltage: 3.3(5)VDC±5%
9CDR Sensor
Type: Mechanical contact Drive voltage: 3.3VDC±5%
Sensor output:
High: CDR Tray Base open
Low: CDR Tray Base closed
10
Cover Open
Sensor
Type: Mechanical contact Drive voltage: 3.3VDC±5%
Sensor output:
High: Cover closed
Low: Cover open
Table 2-6. List of Sensors
Fig. Name Specific
1
2
3
4
7
9
6
E
D
C
A
10
B
5
8

Table of Contents

Other manuals for Epson Stylus Photo R1900

Related product manuals