Printing From Start to Finish
Loading Paper
The type of paper you choose affects the way your printout looks, so be sure to
select the correct paper for your job. If you are just printing a rough draft, plain
paper is fine. For the best results, you’ll want to use one of Epson’s special ink jet
papers designed for your printer. For example, your photos will look great printed
on Epson Ultra Premium Glossy Photo Paper. See “Selecting the Correct Paper
Type” on page 17 for more information.
Follow these steps to load paper in your printer.
1. Open the output tray and its extension.
2. Insert paper, printable side up, against the right edge guide behind the tab.
3. Slide the left edge guide against the paper (but not too tightly).
8 × 10-inch or
Letter-size paper
4 × 6-inch or
5 × 7-inch paper
R220.book Page 7 Sunday, August 7, 2005 3:41 PM
To Next Page
Loading...
