20
Direct Printing Basics
Introduction
This section provides information on how to print directly from
a memory card using settings on the LCD panel and without the
use of a computer.
Note:
❏ Before printing large jobs, print a single sheet to confirm quality.
❏ Disconnecting the USB cable is recommended when printing
directly from a memory card.
For printing from a computer, double click the ESPR300
Reference Guide icon on the desktop.
Loading Single Sheets of Paper
Follow the steps below to load paper into the printer.
1. Open the paper support, then slide out the extension.
2. Lower the output tray and slide out the extension.
3. Position the left edge guide so that the distance between the
two guides is slightly wider than the width of your paper.
4. Fan a stack of plain paper, then tap it on a flat surface to even
the edges.
To Next Page
Loading...
