Epson Stylus Photo R800 - Chapter 1 PRODUCT DESCRIPTION

Epson Stylus Photo R800
1/04 Epson Stylus Photo R800 - 7
Loading Paper
Follow these steps to load plain paper and certain special
papers in the sheet feeder:
1. Open the paper support and slide out its extension.
2. Make sure the output tray is in the lower position. If it isn’t,
lift the tray as shown below, then place one hand on the top
of the printer and ease the tray down into the lower
position.
3. Pull out the output tray extensions.
4. Place your paper in the printer on the right side of the sheet
feeder.
5. Adjust the left edge guide to fit lightly against the paper.
Check the following as you load paper:
❏ Always load the short edge first, even for printing landscape-
oriented documents.
❏ Load the printable side face up. It’s usually whiter or
brighter than the other side.
❏ Load letterhead or preprinted paper into the printer top
edge first.
❏ Don’t load paper above the arrow on the left edge guide.
Loading Special Paper
You can load the following number of sheets of Epson special
media:
If the special paper has a cut corner, load the paper so the cut
corner is positioned as shown here.
Check the paper package for additional handling instructions.
Paper type Loading capacity
Epson Enhanced Matte Paper
Epson Matte Paper Heavyweight
Epson Premium Glossy Photo Paper
Epson Premium Semigloss Photo Paper
Epson Premium Luster Photo Paper
20 sheets
Epson Photo Quality Ink Jet Paper 100 sheets
Epson Premium Bright White Paper 80 sheets
Epson Photo Quality Self Adhesive Sheets
PremierArt Matte Scrapbook Photo Paper
for Epson
1 sheet at a time
Epson Photo Quality Ink Jet Cards 50 sheets
Cut corner