18 Copying
Copying onto a CD/DVD
You can copy your colorful designs or photos
directly onto a CD/DVD without using your
computer.
1. Place your CD/DVD on the CD/DVD tray and
insert it into the product (& “Loading a
CD/DVD” on page 9).
2. Place the original you want to copy on the
document table (& “Placing Originals on the
Document Table” on page 11). The image is
automatically cropped and resized to fit on the
CD/DVD label.
3. Press the r [Copy] mode button.
4. Use the u or d button to select a menu item and
use the l or r button to select a setting item.
Note:
When CD Copy is selected as the Layout, you cannot
change the number of copies.
5. Press the x [Print Settings] button and change
the settings (& “Selecting special print settings”
on page 13). Then press OK to apply the new
settings.
Tip:
If you want to check the print output first, select Plain Paper
as the Paper Type setting and load plain paper.
6. Press the x Start button. Your CD/DVD is
printed.
If you need to stop copying, press the
y Stop/Clear button.
7. When printing is complete, pull the tray out of
the product (& “Ejecting the CD/DVD Tray” on
page 10) and let the CD/DVD dry fully before
handling it.
8. When you finish printing CD/DVDs, raise the
tray lever to return the front tray to its former
position (& “Ejecting the CD/DVD Tray” on
page 10).
Tip:
If ink smears on your printed CD/DVDs, you may need to adjust
the ink density. CD/DVDs from different manufacturers absorb ink
differently, so you may need to adjust the setting for each brand.
After making basic print settings, press the x [Print Settings]
button. Change the Copy Density as needed, then press OK.
Select Color for color copies or B&W for
black-and-white copies.
Select Text, Graphics, or Photo.
Select CD/DVD Copy (& “Selecting a copy layout”
on page 13).
Icon panel Text panel
To Next Page
Loading...
