Epson Stylus Photo RX640 series - Copying with Special Layouts

12 Copying
2. Place the original you want to copy on the
document table (& page 8). The image is
automatically cropped and resized to fit on the
CD/DVD label.
3. Press the r Copy mode button.
4. Use the u, d, l, and r buttons to select these
settings.
5. Check the print settings under the menu items. If
necessary, press the x Print Settings button and
change these settings. (& page 13 for print
settings.) Then press OK to apply the new settings.
Tip:
If you want to check the print output before, select Plain Paper
as the Paper Type setting and load plain paper.
6. Press the x Start button. Your CD/DVD is
printed.
If you need to stop copying, press the
y Stop/Clear Settings button.
7. When printing is complete, pull the tray out of the
EPSON STYLUS PHOTO RX (& page 7) and let
the CD/DVD dry fully before handling it.
8. When you finish printing CD/DVDs, raise the
tray lever to return the front tray to its former
position (& page 7).
Tip:
If ink smears on your printed CD/DVDs, you may need to adjust the
ink density. CD/DVDs from different manufacturers absorb ink
differently, so you may need to adjust the setting for each brand.
After making basic print settings, press the x Print Settings button.
Change the Copy Density as needed, then press OK.
Copying With Special
Layouts
Whether you are copying a newspaper clipping or a
photograph, your EPSON STYLUS PHOTO RX lets
you print your copies using a variety of layouts.
Selecting a Copy Layout
1. Press the r Copy mode button.
2. Use the u or d button to select Layout and press
the r button.
3. Use the u or d button to select one of these layout
options, then press OK.
Select Color for
color copies or
B&W for
black-and-white
copies.
Select Text or
Photo.
Select CD Copy (&
page 12 for layout
options).
Check the print
settings
Copy Layout Setting Result
With Borders
Copies your original with
a standard 3 mm margin.
Borderless*
Copies your photo all the
way to the edges of the
paper.
CD Copy
Copies your photo onto a
CD label using the
Auto-fit function.
2-up Copy
Copies two originals
onto one sheet.
1. Select
the Copy
Layout.
2. Press the
OK button.