Introduction 3
English
Control Panel
Buttons LCD screen
The screen displays a preview of the selected images,
or displays settings that you can change with the
buttons.
Saving power
If the EPSON STYLUS PHOTO RX is inactive for more
than three minutes and Screen Saver Settings is set
to Memory Card Data, the slide show begins.
After 13 minutes of inactivity, the screen turns black
to save energy and the LEDs for the mode buttons turn
on and off in a clockwise rotation.
Press any button (except P On) to return the screen to
its previous state.
Setting the screen saver
1. Press the q Setup button.
2. Use the u or d button to select Screen Saver
Settings, then press the r button.
3. Select Memory Card Data or None.
4. Press OK.
123
456
7
8
9
10
11
12
13
14
Buttons Function
1 P On Press to turn the EPSON STYLUS
PHOTO RX on and off.
2
r Copy Press to copy a photo or a
document.
3
s Memory Card Press to print from a memory card.
4
t Slide/Negative Press to print from slides,
negatives, or film strips.
5
v Specialty Print Press to print photos using a combo
printing sheet, print on CD/DVDs,
make copies or restore faded
photos, or print with colorful frames.
6
u Scan Press to scan to a memory card or
to your computer.
7
w Display Press to change the view of photos
on the LCD screen when selecting
photos.
8
q Setup Press to run maintenance
programs or adjust miscellaneous
settings.
9
x Print Settings Press to display detailed settings
for each mode.
10
y Back Press to cancel the current
operation on the LCD screen and
return to the previous menu.
11 4-way
Scroll
Press to select menu items.
12 OK Press to activate the settings you
have selected.
13 x Start Press to start copying, printing, or
scanning.
14 y Stop/Clear
Settings
Press to stop copying, printing,
scanning, or reset the settings you
have made.
To Next Page
Loading...
