Epson Stylus Photo RX640 series - Page 14

14 Copying
3. Use the u or d button to select the setting item,
and then press OK to apply the new setting.
Copy mode
Zoom For borderless printing, select Auto Fit
Page. Otherwise, select Actual to print
your photo at its original size; or resize
the image to fit various common paper
sizes.
You can also resize the original by a
specific amount (25 to 400%).
Paper Type Select the setting for the type of paper
you loaded (& page 4).
Paper Size Select the paper size you loaded.
Quality Select the quality of the copy to be made.
Copy Density Adjust the density of copied documents.
Borderless
Expansion
Adjust the margins that are trimmed
when you select Borderless.
Standard: No margins are printed.
Mid: The expansion rate is low. (The
margins might be printed.)
Min: The expansion rate is lower than
Mid. (The margins might be
printed.)
Specialty Print mode
Paper Type Select the setting for the type of paper
you loaded (& page 4).
Paper Size Select the paper size you loaded.
Layout Select Borderless to print your photo
without white borders abound the edge.
Quality Select the quality of the copy to be made.
Borderless
Expansion
Adjust the margins that are trimmed
when you select Borderless.
Standard: No margins are printed.
Mid: The expansion rate is low. (The
margins might be printed.)
Min: The expansion rate is lower than
Mid. (The margins might be
printed.)
Filter Select B&W to print your photo in black
and white.