Epson Stylus Photo RX640 series - Page 34

34 Making Prints From Slides or Negatives
2. Select the film type.
If you are scanning slides, select Color
Positive(slide). If you are scanning a film strip,
select one of these options:
■ Color Negative (used in most cases)
■ BW Negative
■ Color Positive(strip)
Press OK after making your selection.
3. If necessary, adjust Color Restoration and Auto
Exp. Level.
4. Press OK. The EPSON STYLUS PHOTO RX starts
previewing your slides.
5. Press OK if the photo is previewed the way you
want.
If you want to scan again, press the y Back button.
6. Use the l or r button to select Print Crop, and then
press OK.
7. Use the l or r button to select the photo you want
to crop, then press OK.
8. Adjust the cropping area and start printing as
described on page 10.