Epson Stylus Pro 10000 - Selecting TCP;IP; Printing to the Fiery Spark

Printing to the Fiery Spark | 19
Selecting TCP/IP
You must select
TCI/IP
from the Control Panel in the Apple menu. In the
TCP/IP window, select
Connect via Ethernet
. Then restart your Macintosh.
Printing to the Fiery Spark
If you’re printing from a Macintosh, select
AdobePS
and
Fiery Spark
from
the Chooser, then close the Chooser.
For instructions on using the Fiery Spark software, see the User Guide on the
Fiery Spark CD-ROM.