Epson Stylus Pro 10000 - Installing Command Workstation

Installing Command WorkStation | 5
5. When you see this screen, select your printer model; then click
Next
to
continue the installation.
6. Click
OK
at the end of the installation. Your computer restarts.
Installing Command WorkStation
This installation also installs ColorWise Pro Tools and Fiery Downloader.
Follow these steps:
1. On the Fiery Spark User Software CD-ROM, open the
CStation
folder.
2. Double-click the
Setup
icon.
3. Follow the instructions on screen.
4. Click
Finish
at the end of the installation. Your computer restarts.
5. Configure Command WorkStation as described in the next section.