Maintenance 140
User’s Guide
Aligning the print head manually
Because there is a distance between the print head
and paper, the misalignment may occur by the
humidity or temperature or moving the print
head bidirectionally. In this case, try UNI-D first,
and then BI-D 2-COLOR. If you want to perform a
highly accurate adjustment, try BI-D ALL.
A
Press the / button to select
ALIGNMENT, and then press the button.
B
Press the / button to select MANUAL,
and then press the button.
C
Press the / button to select UNI-D,
and then press the button to print the
pattern.
D
Check the pattern and select the set number
that has the smallest gaps.
E
When UNI-D #1C appears on the LCD
panel, press the / button to select the
number, and then press the button.
F
Set the number for #1 to #4.
G
Press the button, and then press the
/ button to select BI-D 2-COLOR.
Then press the button.
H
Check the pattern and select the set number
that has the smallest gaps.
I
When BI-D 2-COLOR #1LC appears on the
LCD panel, press the / button to
select the number, and then press the
button.
J
Set the number for #1 to #4.
If you are not satisfied with the result of this
alignment, see the next section to try BI-D
ALL.
After you set the patterns, press the
button to return to the READY state.
Alignment Explanation
UNI-D Use all ink colors except black
colors to align the print head
unidirectionally.
BI-D
2-COLOR
Use Light Cyan and Vivid Light
Magenta ink color to align the
print head bidirectionally.
Bi-D ALL Use all ink colors to align the print
head bidirectionally.
Note:
When you print the pattern on a cut sheet
media such as A3, you need to prepare several
sheets. When the first page is printed, set the
next paper.
To Next Page
Loading...
