Problem Solver 150
User’s Guide
LEVER RELEASED
LOWER THE PAPER SET LEVER
The paper lever is in
the released position.
Move the paper lever to the secured position.
LEVER RELEASED
LOAD PAPER
FRONT COVER OPEN
CLOSE FRONT COVER
The front cover is open. Close the front cover.
INK COVER OPEN
CLOSE RIGHT AND LEFT INK
COVERS
The ink cover(s) is
open.
Close the ink cover(s).
INK COVER OPEN
CLOSE RIGHT INK COVER
INK COVER OPEN
CLOSE LEFT INK COVER
NOT ENOUGH CAPACITY
REPLACE THE RIGHT SIDE
MAINTENANCE TANK
The maintenance tank
is almost full.
Replace the target maintenance tank with a
new one.
See “Replacing the Maintenance Tank”
on page 127.
NOT ENOUGH CAPACITY
REPLACE THE CENTER REAR
MAINTENANCE TANK
NOT ENOUGH CAPACITY
REPLACE THE LEFT SIDE
MAINTENANCE TANK
NOT ENOUGH INK
REPLACE INK CARTRIDGE WITH A
NEW ONE
The ink cartridge is
nearly expended.
Replace the ink cartridge with a new one.
See “Replacing Ink Cartridges” on page
122.
MAINT TANK ERROR
REPLACE THE RIGHT SIDE
MAINTENANCE TANK
The maintenance tank
is not correctly set in
the printer.
Replace the maintenance tank.
See “Replacing the Maintenance Tank”
on page 127.
MAINT TANK ERROR
REPLACE THE CENTER REAR
MAINTENANCE TANK
MAINT TANK ERROR
REPLACE THE LEFT SIDE
MAINTENANCE TANK
MAINTENANCE
PLEASE USE GENUINE EPSON
MAINT TANK
Non-genuine
maintenance tank is
installed.
Replace the maintenance tank with a
genuine Epson cartridge.
See “Replacing the Maintenance Tank”
on page 127.
MAINTENANCE
NON-GENUINE MAINT TANK MAY
NOT PERFORM AT OPTIMUM.
CONTINUE?
<YES NO>
Non-genuine
maintenance tank is
installed.
Select NO (press the button) to replace the
maintenance tank with a genuine Epson
maintenance tank.
See “Replacing the Maintenance Tank”
on page 127.
Error messages Description What to do
To Next Page
Loading...
