The Control Panel 16
User’s Guide
2. There are three cases
depending on the items you have
selected.
A. When you can select a parameter
Example: When selecting PLATEN GAP in the
Printer Setup menu
A
Press the / button to select PLATEN
GAP.
B
Press the button to enter the Platen Gap
item.
C
Press the / button to select a
parameter for the item.
The current setting is marked with an
asterisk (*).
D
Press the button to store the selected
parameter.
E
Press the button to return to the
previous level, or press the button to exit
the Menu mode.
B. When you execute a function
Example: When selecting NOZZLE CHECK in the
Test Print menu
A
In the Test Print menu, press the /
button to select NOZZLE CHECK.
B
Press the button to enter the Nozzle
Check item.
C
Press the button to execute the Nozzle
Check.
To Next Page
Loading...
