42
42 | Setting Up the Printer
17. Attach the paper guides to the bottom of the printer as shown:
18. Continue with the next section to complete the setup process and
connect the power cord.
Completing Setup and Connecting the Power
Cord
1. Attach the manual holder to the left or right side of the stand. Store the
Printer Guide in the holder.
2. Unlock the casters. Then move the printer to the place of use. (The
casters are meant for moving the printer for only a short distance.) Lock
the casters after moving.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
