76
76 | Handling Paper and Other Media
Loading Heavy Sheets
Make sure you load paper in the portrait orientation (short edge first).
The only exception is paper that is more than 19 mil (0.5 mm) thick and
28.6 inches (728 mm) long, which should be loaded in landscape orientation
(Pro 9900 only).
1. Make sure the printer is turned on and the roll paper cover is closed.
2. Press the l Paper Source button until the Sheet icon appears on the
LCD display.
3. Press the button.
4. Feed the sheet into the paper slot. Make sure the right and top edges of
the paper are straight and aligned with the horizontal and vertical lines
on the printer.
Note: You may need to
increase the suction by
pressing the
u button.
This helps hold the paper
in place during loading
and printing.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
