49
Setting Up the Printer | 49
2. Plug the interface cable into the appropriate port on the printer.
3. Plug the other end of the cable into the appropriate connector on your
computer, or network switch or hub.
Installing the Software for Macintosh
Follow the steps below to install the software on a Macintosh. For Windows,
see page 52.
1. Turn on your Macintosh and your printer.
2. Insert the printer software CD-ROM.
3. Double-click the
Epson installer icon.
Network connection
USB connection
Note: You can check for a
newer version of your
printer driver on the Epson
support site at
www.epson.com/support.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
