45
Setting Up the Printer | 45
8. Attach the cable guides to the left or right side of the printer back and
route the power cord to the side of the printer as shown.
9. For the Pro 9900, attach the loops on the paper basket cords to the cable
guides.
10. Plug the power cord into a properly grounded electrical outlet.
Power cord on left side
Power cord on right side
Caution: Do not use an
outlet that is controlled
by an automatic timer or
wall switch. Otherwise,
you may accidentally shut
off the printer and cause
damage.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
