EPSON
Stylus Pro GS6000 Revision A
6.4.2 Around the Print head
I.
Perform Step 1
to
Step 5
in
·'Cleaning Wiper (p226)".
2. Open the MAINTENANCE COVER ASSY (left).
Figure 6-13. Opening the Maintenance cover (left)
3. Using a penlight or the like, confirm that there are
no
foreign objects, such as dust
or ink attached on
or
around the PRINT HEADs as shown
in
the tigure below.
Figure 6-14. Checking
around
the PRINT HEAD
CAUTION
•
l ! J •
_
__
_..
Do
not
touch
the
nozzle
of
the
PRINT
HEAD,
or
the
PRINT
HEAD
may
be
damaged.
Do
not
touch
the
head
of
the
Cleaning
Stick
with
bare
fingers,
or
oil on
your
hand
may
be
attached
to
the
Cleaning
Stick.
It
may
cause
damage
to
the
PRINT
HEAD.
•
Never
dip
the
head
of
the
Cleaning
Stick
in
water.
Otherwise,
the
water
on
it
will
react
with
the
solvent
and
damage
the
PRINT
HEAD.
• Do
not
reuse
the
Cleaning
Sticks
without
rinsing.
Dust
attached
to
the
stick
may
damage
the
PRINT
HEAD.
4. Ifforeign objects, such as dust
or
ink are attached to the PRINT HEAD, remove
them using the Cleaning Stick.
5.
If
the dirt does not come off. use the Ink Cleaner. See "6.4.1 Cleaning Wiper" Step
8.
(p226) .
PRINT HEADs
Figure 6-15. Cleaning
around
the PRINT HEADs
MAINTENANCE
Cleaning 228
Conftdenttaf
To Next Page
Loading...
