EPSON
Stylus Pro GS6000 Revision A
To
reuse
the
Cleaning
Stick, rinse
it
in
the
liquid
and
dry
it
for
about
one
hour
after
cleaning
before
putting
it
away.
Dispose
of
the
used
Ink
Cleaner
in
the
same
way
as
the
waste
ink.
6. Close the MAINTENANCE
COVER ASSY (left) firmly until it
is
locked.
Figure 6-16. Closing
the
Maintenance Cover
7.
Press the [Pause/Reset) button several times to return to the READY state.
6.4.3 Cleaning the
Pressure
Rollers
and
Platen
l.
Make sure the printer
is
turned
off
and all the lights are off, and then unplug the
power cords from the electrical outlets.
2. Leave the printer for a minute.
3.
Open the Front Cover.
Figure 6-17. Opening the
Front
Cover
4.
Remove paper powder and dust attached
to
the Pressure Rollers using a soft brush.
Figure 6-
18.
Removing the
paper
powder
and
dust
MAINTENANCE
Cleaning 229
Confidenttal
To Next Page
Loading...
