EPSON
Stylus Pro GS6000 Revision A
6.4.1
Cleaning
Wiper
CAUTION
I
•
When
cleaning
the
Cleaning
Wiper,
the
PRINT
HEAD
cap
must
be
removed
and
cleaning
must
be
complete
before
the
head
dries.
We
recommend
finishing
the
cleaning
within
15
minutes
to
prevent
the
head
from
drying.
1.
Turn on the printer.
2.
Press the
Ill>
button
to
enter the Menu mode.
3.
Press the
,A
I T button
to
display ·'MAINTENANCE", and then press the
I>
button.
4.
Press the
£.IT
button
to
display "CARRIAGE MAINTENANCE'', and then
press the
Ill>
button.
5.
Press the [Enter] button to start Carriage Maintenance.
The
PRINT HEAD moves to the left, and the Cleaning Wiper moves forward.
--OPEN MAINTCOVERS"
is
displayed on the LCD panel.
6.
Open the MAINTENANCE
COVER
ASSY (right).
Figure 6-9. Opening the Maintenance cover (right)
CAUTION
I
•
•
j.
Do
not
touch
the
Cleaning
Wiper
and
head
cap
unit
with
bare
fingers.
Head
cleaning
may
not
be
performed
correctly
because
of
oil from
your
hands.
Do
not
leave a used
Cleaning
Stick
on
the
printer's
cover
to
avoid stains .
7.
Prepare the Cleaning Stick and the Ink Cleaner
to
remove the ink and dust on the
Cleaning Wiper.
8.
Put on the plastic gloves and pour about l 0
ml
of
Ink Cleaner into the plastic cup.
Then, dip the Cleaning Stick into the Ink Cleaner taking care not to drop it from
the stick.
Figure 6-10.
Preparation
for Cleaning
MAINTENANCE
Cleaning 226
Conftdenttaf
To Next Page
Loading...
