Before Printing
Before printing, set the paper settings for the
characteristics of the paper you are going to use. Settings
are adjusted as follows.
❏ Select Custom Paper Setting in the printer Paper
menu.
U “Paper menu” on page 37
❏ LFP Remote Panel 2 can be used to copy from the
computer the paper settings you configured in the
printer settings menu.
Note:
❏ Be sure to check the paper characteristics such as
paper tension, ink fixating, or paper thickness before
setting the custom paper. For the paper's
characteristics, check the paper's documentation or
with your local dealer.
❏ Test the print quality with this printer before
purchasing a large amount of paper.
Saving Optimal Settings
for the Current paper
(Print Paper Settings)
A variety of paper settings can be optimized for the
current paper and stored in the printer.
Once frequently used settings have been stored in a
paper setting bank, it can be recalled to instantly
optimize multiple parameters.
The printer offers a total of 10 paper setting banks.
This section describes how to create paper setting banks
and the settings that can be stored.
Custom Paper Setting Details
The following items can be configured in the custom
paper settings:
❏ Select Reference Paper
❏ Platen Gap
❏ Detect Paper Thickness
❏ Paper Feed Adjust
❏ Paper Suction
❏ Roll Paper Tension
❏ Remove Skew
❏ Setting Name
Setting Item DetailsU “Paper menu” on page 37
Saving Settings
Use the following procedure to save paper settings.
Buttons that are used in the following settings
Choosing a Custom Paper Setting
Bank
A
Confirm that the printer is ready to print.
Press the l/r buttons to open the . tab, then
press the Z button.
The Paper menu will be displayed.
SC-F6000 Series User’s Guide
Basic Operations
27
To Next Page
Loading...
Need help?
General