158
Maintenance Menu
Related tasks
Loading Roll Paper
Loading Single Cut Sheets
Loading Paper in the Auto Sheet Feeder
Cleaning the Auto Sheet Feeder
If ink smears on a printout when printing from the auto sheet feeder (especially on glossy paper), you
can clean the auto sheet feeder roller to remove excess ink.
Note: If ink smears when printing on glossy paper, try printing individual cut sheets one at a time instead
of using the auto sheet feeder.
1. Load a few sheets of plain paper in the auto sheet feeder.
2. Press the home button, if necessary.
3. Select Settings > Maintenance > Paper Guide Cleaning.
You see a screen like this:
4. Select Start to clean the paper guide.
The paper is ejected.
To Next Page
Loading...
