54
10. Place the roll paper into the roll paper spindle holders in the printer with the black end of the spindle
on the right.
11. Insert the leading edge of the roll paper into the paper feeder until you hear a beep.
Note: Make sure the leading edge of the roll paper is not bent or skewed, or a paper jam or skew
error may occur.
12. Close the roll paper cover and the cut sheet cover.
13. Select the paper type you loaded on the LCD screen and set the remaining amount, if necessary.
If you installed the optional stand and paper basket, make sure the paper basket is open to catch
printouts.
Parent topic: Roll Paper Handling
Related references
Compatible Epson Papers
Roll Paper Options - Windows
To Next Page
Loading...
