Epson SureColor T5270D Setup Guide

6 | Assembling the Stand
2. Slide the horizontal strut into both of the legs.
3. Use the long end of the hex wrench to tighten the pre-placed screws on each side of the horizontal
strut.
4. Lock the casters to fix the stand in place. (When moving the printer, unlock the casters.)
T-Series_Setup_Guide_S.book Page 6 Tuesday, September 16, 2014 2:53 PM

Epson SureColor T5270D Specifications

General

Brand	Epson
Model	SureColor T5270D
Category	Printer
Language	English