32 | Loading Roll Paper into the Secondary Roll Unit
Loading Roll Paper into the Secondary Roll Unit
You can load a second roll of paper into the secondary roll unit of the SureColor T5270D and T7270D.
1. Move the paper basket to the horizontal position by pulling the basket towards you, then lowering it.
Push the paper basket in towards the printer.
2. Press the button on the control panel. Select Roll2, then press the OK button.
3. Use the drawer handles to pull the secondary roll unit out.
Note: Pull out the secondary roll unit only when instructed by the control panel. If the roll unit is pulled out
carelessly while paper is loaded, it can cause paper jams or damage the paper.
T-Series_Setup_Guide_S.book Page 32 Tuesday, September 16, 2014 2:53 PM
To Next Page
Loading...
Need help?
General