Mounting the Printer on the Stand | 19
Mounting the Printer on the Stand
You need four people to install the printer and position it on the stand. When lifting the printer, only hold
the areas shown below. Otherwise, damage may occur.
Caution: Before installing the printer, lock the casters to make sure the stand is fixed in place.
1.
Lift the printer onto the stand. Line up the marks on the bottom of the printer with the arrows on the
top of the stand legs before setting the printer down.
Caution: Make sure the second roll unit is pulled out from the stand. If the second roll unit is not extended, the
printer may be damaged.
To Next Page
Loading...
