26 | Loading Roll Paper
4. Close the ink cover and wait for the ink to charge. The ink charging process takes about 25 minutes.
Caution: Do not turn off the printer or open the ink cover when it is charging or you may waste ink. When the ink
charging is completed, press and Load paper will be displayed on the control panel. Do not perform
operations other than those specified on the screen.
Loading Roll Paper
Before you start, you may want to close the paper basket. This will make it easier to access the top of the
printer during the paper loading process.
Note: If the optional MFP scanner is installed, raise the scanner until you hear a click.
To Next Page
Loading...
