Epson TM-C3400 - Printer Settings Configuration; DIP Switch Settings; DIP Switch Setting Caution

TM-C3400 User’s Manual 11
Printer Settings
Perform printer settings with DIP switches, and then with Setup
Wizard in TM-C3400 Easy Setup Utility.
Settings with DIP Switches
CAUTION:
DIP switch settings are enabled only when the power is turned on or the
printer is reset via the interface. If the settings are changed after that,
the functions will not change.
1. Turn off the printer.
2. Open the ink cartridge cover and remove the DIP switch cover.
3. Set the DIP switches, using the tip of a tool, such as a small
screwdriver.
.
SW Function ON OFF Initial Setting
1 Operation of the power switch
Reset Power on/off
OFF
2 -
Fixed to OFF (Do not change.)
3 Paper selection
Fanfold paper Roll paper OFF
7 - Fixed to OFF (Do not change.)
8 Buzzer volume
High Low
OFF