6
Part Names and Functions
Printer
Front Side
1 Manual Cutter
Use this cutter to cut the paper. (U "Cutting the Roll Paper" on page 17)
2 Cover Open Button
Press this button to open the roll paper cover. (U "Opening the Roll Paper Cover" on page 16)
3 NFC Tag
To establish communication with an NFC device, bring the device close to the NFC tag ( mark)
on the printer. For the functions using the NFC tag, refer to Technical Reference Guide.
4 Roll Paper Cover
Open this cover to set/replace roll paper. (U "Setting/Replacing the Roll Paper" on page 18)