14 | P a g e
Configuring the Epson TM-P60 II using the EpsonNet Config utility
NOTE: Only one printer should be configured at a time, as all printers have the same settings
configured from the factory (i.e. default IP 192.168.192.168).
Power on the printer and connect cable to the computer via (mini USB to USB-A Cable).
1. Select Start, point to All Programs, point EpsonNet; then
select EpsonNet Config.
2. Select the printer that you want to set the IP address for
(its default IP when reset is 192.168.192.168), and then
select the Configuration button.
To Next Page
Loading...
