Epson TM-S1000 User Manual

8 CaptureOne User’s Manual
English
LED Indicators
POWER LED
❏ Comes on when the scanner power is on.
ERROR LED
❏ Comes on when the scanner is off line (and when the scanner cover or
franker cover is open.)
❏ Flashes when an error occurs or when waiting for document removal.
(See “Troubleshooting”[on page 19 of this manual] for more
information.)
DOCUMENT LED
❏ Comes on when the scanner is ready to process documents in the
ASF/SF or while the scanner is processing documents.
❏ Flashes when the scanner is waiting for document insertion.
Power Switch
Press the power switch to turn on or off the scanner.
Power Switch Cover
WARNING:
If a machine failure has occurred while
the included power switch cover is
attached, unplug the power cable
immediately. Continued use may result
in a fire hazard.
The power switch cover is intended to
prevent the power switch from being
pressed accidentally. To use the cover, place it over the power switch.
When turning on or off of the switch is required, insert a pointed object
into one of the holes of the cover, and press the switch.
When the scanner is stored or not in use for an extended period, turn off
the power switch and disconnect the power cord.
POWER LED
ERROR LED
DOCUMENT LED

Epson TM-S1000 Specifications

General

Film scanning	No
Grayscale levels	256
Input color depth	- bit
Maximum scan size	120 x 235 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Scan media weight	60 - 120 g/m²
Dimensions (WxDxH)	160 x 355 x 176 mm
Standard media sizes	Length: 120 mm - 235 mm (approx 4.8 in - 9 in), Height: 68mm - 120 mm (approx 2.7 in - 4.8 in), Thickness: 0.075 x 0.2 mm (approx 0.003 in - 0.008 in), Weight: 60 - 120 g/m2 (approx 16lb - 32lb)

Weight and Dimensions

Depth	355 mm
Width	160 mm
Height	176 mm
Weight	4000 g