Epson TM-S1000 User Manual

CaptureOne User’s Manual 19
English
Cleaning the MICR Unit
Dirt on the MICR unit may cause frequent magnetic character reading
errors. Clean the MICR unit every six months or every 100,000 passes.
Use the TM-S1000 Utility in the Utility & Documents CD or your
application to clean the MICR unit.
Use the following cleaning card:
KIC Team, Inc.
• Waffletechnology
®
MICR cleaning card (model:CS1B15WS)
• Epson Check Scanner Cleaning Kit (model:KWEPS-KCS2)
Note:
For information on cleaning procedures, see the TM-S1000 Utility User’s
Manual.
Do not use sticky cleaning sheets. They may cause a paper jam or machine failure.
Be sure to dispose of used cleaning sheets.
It is recommended to clean the MICR unit once per week or once every 2,000
checks for good reading results.
It is recommended to clean the image scanner after cleaning the MICR unit. (See
“Cleaning the Image Scanner” on page 18.)
Troubleshooting
ERROR LED is Flashing or Lit
❏ Make sure that the covers are properly closed.
❏ If a paper jam has occurred, remove the jammed paper, referring to
the next section “Paper Jams.”
❏ Turn off the scanner, and then turn it on after a while. If the error
persists, consult a qualified service person for repair.
Paper Jams
Open the scanner cover or franker cover to remove the jammed paper.
(See “Opening the Covers” on page 11 and “Opening the Franker Cover”
on page 11.)

Epson TM-S1000 Specifications

General

Film scanning	No
Grayscale levels	256
Input color depth	- bit
Maximum scan size	120 x 235 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Scan media weight	60 - 120 g/m²
Dimensions (WxDxH)	160 x 355 x 176 mm
Standard media sizes	Length: 120 mm - 235 mm (approx 4.8 in - 9 in), Height: 68mm - 120 mm (approx 2.7 in - 4.8 in), Thickness: 0.075 x 0.2 mm (approx 0.003 in - 0.008 in), Weight: 60 - 120 g/m2 (approx 16lb - 32lb)

Weight and Dimensions

Depth	355 mm
Width	160 mm
Height	176 mm
Weight	4000 g